BCI 1884SS Instruções de Operação descarregar pdf (Página 22)

Chapter 4: Operating instructions

4-8 Pulse Oximeter for Sleep Screening Operation Manual

NOTE! Once the monitor is powered off in the Data Collection Mode, it cannot resume

collection of trend data without clearing all previously obtained data.

• Momentarily pressing the F key will not activate the printer in the Data Collection

Mode. The printer function is suppressed in this mode.

• Pressing and holding the

F key will advance the paper (see pg. 7-5). Reloading the

paper is allowed in this mode.

• The serial link to the PC computer will be suppressed in this mode.

Trend Printing Mode

The Trend Printing Mode is intended for use in the output of the trend data summation to the

built-in printer or to a PC for a full computer data download.

• The Trend Printing Mode is entered after the monitor is powered down in the Data

Collection Mode, and powered back up, or when the trend memory becomes full.

• The user functions in Trend Printing Mode are:

• The SpO

display will be blank and the heart rate display will flash “trn”. The

oximetry function will be suppressed in this mode (see Fig. 4.5).

• Pressing the

key will turn off the power. After power down, the unit will be

powered up to the same Trend Printing mode.

• Briefly pressing the

F key will activate a printout (statistical sleep screening

information, see Fig. 7.1) Pressing the

F key during the printout will terminate the

printout. Printing the printout can be repeated an unlimited number of times.

• Pressing and holding the

F key will advance the paper (see pg. 7-5). Reloading the

paper is allowed in this mode.

• Holding the

F key for 6 to 8 seconds at power up will clear the trend data and switch

the unit into Verification Mode (see Ch. 6).

• The serial link to a PC will start as soon as the monitor is powered up. If a

miscommunication between the monitor and the PC occurs, turning ‘Off’ the monitor

and then back ‘On’ will re-establish the link. (see Appendix A for output protocol)

Figure 4.4: Data Collection Mode display

Figure 4.5: Trend Printing Mode display

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 42 43

Sem comentários

BCI 1884SS Instruções de Operação Página 22